Skip to main content

Thread: LCD Monitor seen as CRT - resolution problems

-

just installed ubuntu 9.10, 32 bit, , standard 17" lcd monitor not recognized. instead, i'm stuck system defaults , max resolution of 800x600 (640x480 after installing nvidia drivers). since other 7 distros i'm booting happily finding monitor , i'm used 1024x768, i'm not enjoying experience.

in hopes of tweaking /etc/x11/xorg.conf, i've grabbed info mint partition fedora partition try , explain kk want more. here's i've got far, hasn't made slightest difference:

section "screen"
identifier "configured screen device"
defaultdepth 24
subsection "display"
depth 24
modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
endsubsection
endsection

section "device"
identifier "configured video device"
driver "nvidia"
endsection

section "monitor"
identifier "configured monitor"
vendorname "cornea"
modelname "lcd"
horizsync 30.0 - 110.0
vertrefresh 50.0 - 150.0
option "dpms"
endsection
also, /var/log/xorg.0.log

(==) log file: "/var/log/xorg.0.log", time: fri oct 30 15:55:11 2009
(==) using config file: "/etc/x11/xorg.conf"
(==) no layout section. using first screen section.
(**) |-->screen "configured screen device" (0)
(**) | |-->monitor "<default monitor>"
(==) no device specified screen "configured screen device".
using first device section listed.
(**) | |-->device "configured video device"
(==) no monitor specified screen "configured screen device".
using default monitor configuration.
aha! caught attempt configured monitor when wasn't. suppose change default monitor, don't see how that's going fix it. so, i'd appreciate if point out i've missed including.

btw, changed configured monitor "monitor0" , rebooted. no change. *sigh*

edit: tried xrandr options; no difference. every boot, have configure display settings icon popping since apparently ubuntu can't find monitor or understand sees.

interesting seem 1 problem , there seems nothing in wiki correcting such events. i've had long history ubuntu , i'd hate see end here.


Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Hardware [SOLVED] LCD Monitor seen as CRT - resolution problems


Ubuntu

Comments

Post a Comment

Popular posts from this blog

invalid use of void expresion in FlexiTimer2 library

-
Image
hello, first post asking in forum patient if dont correctly   well, im trying make robot evades obstacles , uses interrupts in order distances. ive used flexitimer2 run void function each 5ms, problem whe try verify program says me there error in use of flexitimer.    code: [select] flexitimer2::set(1, 1.0/1000, rastreodistanciamin()); i copy code below, please can tell error , how solve it, ive been loking dont know do. thank you code: [select] #include <flexitimer2.h> #include <servo.h> //motor a int ena = 7; int in1=6; int in2 = 5; //motor b int in3=11; int in4=10; int enb=9; servo cabeza; //hc-sr04 device int echo = 13; int triger = 12; //it use hc-sr04 determine , return distance in front of him int calculodistancia(){   volatile int tiempo;   volatile int distancia;   digitalwrite(triger,low); /* por cuestión de estabilización del sensor*/   delaymicroseconds(5);   digitalwrite(triger, high); /* envío del pulso ultrasónico*/   delaymicroseconds(10);   tiem
Read more

error: a function-definition is not allowed here before '{' token

-
i'm new member. me pls code: [select] void manhinh1(){                              tempc = analogread(adc);   tempc = tempc * 0.48828125;                                          lcd.setcursor(0, 0); lcd.print("nhiet: ");                                      lcd.setcursor(7, 0); lcd.print(tempc);   lcd.setcursor(13,0); lcd.print((char)223);    lcd.setcursor(14,0); lcd.print("c");   if(max > min){     if (tempc > max)            {digitalwrite(fan, low);           lcd.setcursor(2, 1); lcd.print("lam mat.....");}     else if (tempc < min)           {digitalwrite(hot, low);           lcd.setcursor(2, 1); lcd.print("dang suoi...");           delay(10000); }     else if (tempc > min && tempc < max)           {digitalwrite(fan, high);            digitalwrite(hot, high);            lcd.setcursor(2, 1); lcd.print("on dinh!!");}              }    else if (max < min){    lcd.setcursor(0, 1);               
Read more

LED Strip Code

-
i downloaded code. here have several single leds flashing music microphone. in project, instead of single rgb leds, have 5 rgb led strips. need change in code? led strip 10m supernight rgb strip cut 5 equal strips. // arduino pin numbers const int do_pin = 2; const int ao_pin = 0; int sound; int led1 = 8; int led2 = 9; int led3 = 10; int led4 = 11; int led5 = 12;   void setup() {   pinmode(do_pin, input);   pinmode(led1, output);   pinmode(led2, output);   pinmode(led3, output);   pinmode(led4, output);   pinmode(led5, output);   serial.begin(9600); }   void loop() {     if (sound > 31) {     digitalwrite(led1, high);   }     if (sound < 31) {     digitalwrite(led1, low);   }     if (sound > 35) {     digitalwrite(led2, high);   }     if (sound < 35) {     digitalwrite(led2, low);   }     if (sound > 40) {     digitalwrite(led3, high);   }     if (sound < 40) {     digitalwrite(led3, low);   }     if (sound > 45) {     digitalwrite(led4, high);   }     if
Read more