Configuring Raspberry Pi 2 to use USB Microphone and Headset - Raspberry Pi Forums

-

hello,

attempting setup plantronics .audio 400 dsp raspberry pi 2 model b default device jessie installed.
headset link: http://www.plantronics.com/us/product/audio-400-dsp

far in attempts have been unsuccessful in setting default device. usb recognized pi, , manually selecting via aplay or arecord work:

aplay test.wav –dsysdefault:card=dsp
arecord test.wav –dsysdefault:card=dsp

below include research have done , attempted:
http://raspberrypi.stackexchange.com/qu ... rry-jessie
- on reboot of device, appears asoundrc getting rewritten card 1 card 0.

viewtopic.php?f=66&t=129514
- this removes default sound/microphone devices. however, when trying test aplay or arecord, getting ‘channels count not available’.
- this allow me listen sound via browser

http://raspberrypi.stackexchange.com/qu ... cketsphinx
- did not adjust anything

http://raspberrypi.stackexchange.com/qu ... ian-jessie
- the indexing did not work me, love see if housni creates bash script

in short, have detailed instructions on how connect usb headset (microphone + headphones) raspberry pi 2 jessie installed default device?

thanks!

try simple route well; see speaker icon on menu bar, top right? right-click on that.
should see default analog , hdmi options listed usb stuff plugged in *should* include them well. if click on usb headset might work. if not, try clicking on last item should there, 'device settings...' open dialogue fiddle with. can set volume levels, choose 'capture' device (i.e. microphone) , set default.

had no decent success using c-media based usb sound, perfect success ancient griffin imic dongle. no file editing required.


raspberrypi



Comments

Post a Comment

Popular posts from this blog

invalid use of void expresion in FlexiTimer2 library

-
Image
hello, first post asking in forum patient if dont correctly   well, im trying make robot evades obstacles , uses interrupts in order distances. ive used flexitimer2 run void function each 5ms, problem whe try verify program says me there error in use of flexitimer.    code: [select] flexitimer2::set(1, 1.0/1000, rastreodistanciamin()); i copy code below, please can tell error , how solve it, ive been loking dont know do. thank you code: [select] #include <flexitimer2.h> #include <servo.h> //motor a int ena = 7; int in1=6; int in2 = 5; //motor b int in3=11; int in4=10; int enb=9; servo cabeza; //hc-sr04 device int echo = 13; int triger = 12; //it use hc-sr04 determine , return distance in front of him int calculodistancia(){   volatile int tiempo;   volatile int distancia;   digitalwrite(triger,low); /* por cuestión de estabilización del sensor*/   delaymicroseconds(5);   digitalwrite(triger, high); /* envío del pulso ultrasónico*/   delaymicroseconds(10);   tiem
Read more

error: a function-definition is not allowed here before '{' token

-
i'm new member. me pls code: [select] void manhinh1(){                              tempc = analogread(adc);   tempc = tempc * 0.48828125;                                          lcd.setcursor(0, 0); lcd.print("nhiet: ");                                      lcd.setcursor(7, 0); lcd.print(tempc);   lcd.setcursor(13,0); lcd.print((char)223);    lcd.setcursor(14,0); lcd.print("c");   if(max > min){     if (tempc > max)            {digitalwrite(fan, low);           lcd.setcursor(2, 1); lcd.print("lam mat.....");}     else if (tempc < min)           {digitalwrite(hot, low);           lcd.setcursor(2, 1); lcd.print("dang suoi...");           delay(10000); }     else if (tempc > min && tempc < max)           {digitalwrite(fan, high);            digitalwrite(hot, high);            lcd.setcursor(2, 1); lcd.print("on dinh!!");}              }    else if (max < min){    lcd.setcursor(0, 1);               
Read more

LED Strip Code

-
i downloaded code. here have several single leds flashing music microphone. in project, instead of single rgb leds, have 5 rgb led strips. need change in code? led strip 10m supernight rgb strip cut 5 equal strips. // arduino pin numbers const int do_pin = 2; const int ao_pin = 0; int sound; int led1 = 8; int led2 = 9; int led3 = 10; int led4 = 11; int led5 = 12;   void setup() {   pinmode(do_pin, input);   pinmode(led1, output);   pinmode(led2, output);   pinmode(led3, output);   pinmode(led4, output);   pinmode(led5, output);   serial.begin(9600); }   void loop() {     if (sound > 31) {     digitalwrite(led1, high);   }     if (sound < 31) {     digitalwrite(led1, low);   }     if (sound > 35) {     digitalwrite(led2, high);   }     if (sound < 35) {     digitalwrite(led2, low);   }     if (sound > 40) {     digitalwrite(led3, high);   }     if (sound < 40) {     digitalwrite(led3, low);   }     if (sound > 45) {     digitalwrite(led4, high);   }     if
Read more