Skip to main content

Thread: Ubuntu 9.04 NBR, Firestarter, and Xbox Live problems

-

hi all,

having issues using laptop access xbox live through 360.

have dell mini 9, running ubuntu 9.04 netbook remix. installed firestarter well. have dhcp installed well. receive error whenever trying open firestarter or start firewall when have checked option share connections.

have been soliciting elsewhere, haven't been able figure out yet. i'll try run down we've tried far.

opening firestarter gives me error box says "unknown error has occurred" , asks me check settings/connections. please see attached image titled "error1". error not present when "enable internet connection sharing" unticked in options.

clicking out of box shows firestarter, seen in attached image "firestarter2". eth0 connection xbox ethernet cable. shows activity when try test connection through xbox's console, , shows 0.0 kb/s 0.2 kb/s. eth1 wireless connection. not under load in screenshot, show activity when is. pan0 unknown, , never see activity on it, don't know does.

used "ifconfig" command see status of local device's ip. used command
code:
sudo ifconfig eth0 192.168.5.1
to establish ip address local device. confirmed "ifconfig" command. entered firestarter settings , established range of ip addresses:
lowest: 192.168.5.2
highest: 192.168.5.10


still gave me unknown error. noticed after clicking "apply" if went firestarter's settings, had reverted automatic setting.

checked dhcp status via command , result:
code:
nick@tiny-laptop:~$ sudo apt-get install dhcp3-server [sudo] password nick: reading package lists... done building dependency tree reading state information... done dhcp3-server newest version. 0 upgraded, 0 newly installed, 0 remove , 0 not upgraded.
i tried restarting firestarter via terminal following command , response:
code:
sudo /etc/init.d/firestarter restart  * stopping firestarter firewall...                                            [ ok ]  * starting firestarter firewall...                                            [fail]
i @ complete loss. advice appreciated. have googled , searched , followed guide after guide, , cannot make headway. easy on vista laptop!
attached images attached images

*bump*

no help? took screenshots , laid out every step i've taken.


Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Networking & Wireless Ubuntu 9.04 NBR, Firestarter, and Xbox Live problems


Ubuntu

Comments

Post a Comment

Popular posts from this blog

invalid use of void expresion in FlexiTimer2 library

-
Image
hello, first post asking in forum patient if dont correctly   well, im trying make robot evades obstacles , uses interrupts in order distances. ive used flexitimer2 run void function each 5ms, problem whe try verify program says me there error in use of flexitimer.    code: [select] flexitimer2::set(1, 1.0/1000, rastreodistanciamin()); i copy code below, please can tell error , how solve it, ive been loking dont know do. thank you code: [select] #include <flexitimer2.h> #include <servo.h> //motor a int ena = 7; int in1=6; int in2 = 5; //motor b int in3=11; int in4=10; int enb=9; servo cabeza; //hc-sr04 device int echo = 13; int triger = 12; //it use hc-sr04 determine , return distance in front of him int calculodistancia(){   volatile int tiempo;   volatile int distancia;   digitalwrite(triger,low); /* por cuestión de estabilización del sensor*/   delaymicroseconds(5);   digitalwrite(triger, high); /* envío del pulso ultrasónico*/   delaymicroseconds(10);   tiem
Read more

error: a function-definition is not allowed here before '{' token

-
i'm new member. me pls code: [select] void manhinh1(){                              tempc = analogread(adc);   tempc = tempc * 0.48828125;                                          lcd.setcursor(0, 0); lcd.print("nhiet: ");                                      lcd.setcursor(7, 0); lcd.print(tempc);   lcd.setcursor(13,0); lcd.print((char)223);    lcd.setcursor(14,0); lcd.print("c");   if(max > min){     if (tempc > max)            {digitalwrite(fan, low);           lcd.setcursor(2, 1); lcd.print("lam mat.....");}     else if (tempc < min)           {digitalwrite(hot, low);           lcd.setcursor(2, 1); lcd.print("dang suoi...");           delay(10000); }     else if (tempc > min && tempc < max)           {digitalwrite(fan, high);            digitalwrite(hot, high);            lcd.setcursor(2, 1); lcd.print("on dinh!!");}              }    else if (max < min){    lcd.setcursor(0, 1);               
Read more

LED Strip Code

-
i downloaded code. here have several single leds flashing music microphone. in project, instead of single rgb leds, have 5 rgb led strips. need change in code? led strip 10m supernight rgb strip cut 5 equal strips. // arduino pin numbers const int do_pin = 2; const int ao_pin = 0; int sound; int led1 = 8; int led2 = 9; int led3 = 10; int led4 = 11; int led5 = 12;   void setup() {   pinmode(do_pin, input);   pinmode(led1, output);   pinmode(led2, output);   pinmode(led3, output);   pinmode(led4, output);   pinmode(led5, output);   serial.begin(9600); }   void loop() {     if (sound > 31) {     digitalwrite(led1, high);   }     if (sound < 31) {     digitalwrite(led1, low);   }     if (sound > 35) {     digitalwrite(led2, high);   }     if (sound < 35) {     digitalwrite(led2, low);   }     if (sound > 40) {     digitalwrite(led3, high);   }     if (sound < 40) {     digitalwrite(led3, low);   }     if (sound > 45) {     digitalwrite(led4, high);   }     if
Read more