Skip to main content

Thread: USB file transfer from Topfield stopped working after 9.04 --> 9.10

-

hi all,
have been using old amilo li2727 laptop , puppy topfield 5100. did not work out-from-the-box 9.04, first got these errors:

error: can not perform autodetection.
error: /proc/bus/usb/devices can not open reading

editing /etc/init.d/mountdevsubfs.sh , adding these lines @ end of file did trick in 9.04:

code:
#      # magic make /proc/bus/usb work      #      mkdir -p /dev/bus/usb/.usbfs      domount usbfs "" /dev/bus/usb/.usbfs -obusmode=0700,devmode=0600,listmode=0644      ln -s .usbfs/devices /dev/bus/usb/devices      mount --rbind /dev/bus/usb /proc/bus/usb
after upgrading 9.10 square one, , again getting same errors got 9.04 before editing mentioned file.

did not take long me notice mountdevsubfs.sh gone, instead there file called:

mountdevsubfs.sh.dpkg-old, guess not used anymore , stuff have been moved place/file?

what? need do/edit ubuntu work again topfield? wlan stopped working, nice going ...

...stunned silence. no advice has come.

there thread same dead end here.

get

code:
> puppy -c dir  error: can not perform autodetection.  error: /proc/bus/usb/devices can not open reading.  error: no such file or directory
i wonder whether problem puppy 3 years out of date , needs recompiling against current apis. or trying access /proc/bus/usb/devices , that's obsolete location long since removed - don't know i'm merely guessing.

rick


Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Multimedia Software [ubuntu] USB file transfer from Topfield stopped working after 9.04 --> 9.10


Ubuntu

Comments

Post a Comment

Popular posts from this blog

invalid use of void expresion in FlexiTimer2 library

-
Image
hello, first post asking in forum patient if dont correctly   well, im trying make robot evades obstacles , uses interrupts in order distances. ive used flexitimer2 run void function each 5ms, problem whe try verify program says me there error in use of flexitimer.    code: [select] flexitimer2::set(1, 1.0/1000, rastreodistanciamin()); i copy code below, please can tell error , how solve it, ive been loking dont know do. thank you code: [select] #include <flexitimer2.h> #include <servo.h> //motor a int ena = 7; int in1=6; int in2 = 5; //motor b int in3=11; int in4=10; int enb=9; servo cabeza; //hc-sr04 device int echo = 13; int triger = 12; //it use hc-sr04 determine , return distance in front of him int calculodistancia(){   volatile int tiempo;   volatile int distancia;   digitalwrite(triger,low); /* por cuestión de estabilización del sensor*/   delaymicroseconds(5);   digitalwrite(triger, high); /* envío del pulso ultrasónico*/   delaymicroseconds(10);   tiem
Read more

error: a function-definition is not allowed here before '{' token

-
i'm new member. me pls code: [select] void manhinh1(){                              tempc = analogread(adc);   tempc = tempc * 0.48828125;                                          lcd.setcursor(0, 0); lcd.print("nhiet: ");                                      lcd.setcursor(7, 0); lcd.print(tempc);   lcd.setcursor(13,0); lcd.print((char)223);    lcd.setcursor(14,0); lcd.print("c");   if(max > min){     if (tempc > max)            {digitalwrite(fan, low);           lcd.setcursor(2, 1); lcd.print("lam mat.....");}     else if (tempc < min)           {digitalwrite(hot, low);           lcd.setcursor(2, 1); lcd.print("dang suoi...");           delay(10000); }     else if (tempc > min && tempc < max)           {digitalwrite(fan, high);            digitalwrite(hot, high);            lcd.setcursor(2, 1); lcd.print("on dinh!!");}              }    else if (max < min){    lcd.setcursor(0, 1);               
Read more

LED Strip Code

-
i downloaded code. here have several single leds flashing music microphone. in project, instead of single rgb leds, have 5 rgb led strips. need change in code? led strip 10m supernight rgb strip cut 5 equal strips. // arduino pin numbers const int do_pin = 2; const int ao_pin = 0; int sound; int led1 = 8; int led2 = 9; int led3 = 10; int led4 = 11; int led5 = 12;   void setup() {   pinmode(do_pin, input);   pinmode(led1, output);   pinmode(led2, output);   pinmode(led3, output);   pinmode(led4, output);   pinmode(led5, output);   serial.begin(9600); }   void loop() {     if (sound > 31) {     digitalwrite(led1, high);   }     if (sound < 31) {     digitalwrite(led1, low);   }     if (sound > 35) {     digitalwrite(led2, high);   }     if (sound < 35) {     digitalwrite(led2, low);   }     if (sound > 40) {     digitalwrite(led3, high);   }     if (sound < 40) {     digitalwrite(led3, low);   }     if (sound > 45) {     digitalwrite(led4, high);   }     if
Read more