Jessie and fstab - Raspberry Pi Forums

-

i use raspbian years , mounted shares in fstab without problems. switched jessie have one.
after reading lot of topics auto mounting share cifs in fstab still got stuck.
1 of solutions add noauto,x-systemd.automount line in fstab.
when sudo mount -a --verbose gives me no output on mounting of share , share not mounted.
when remove noauto,x-systemd.automount line in fstab sudo mount -a mounting share.
still no mounting @ boot time have maualy.

line in fstab is:
//192.168.1.3/back-up/grandix/grandos/webcam /mnt/webcam cifs credentials=/home/pi/secret.txt, 0 0

bug in jessie , if so, why going on such long time? minor bug?
if minor bug why there no solutions find?

hope there has found out long time ago , can give ;-)

the "noauto" says , prevents being automatically mounted @ boot, , prevents being mounted "mount -a" "auto" mount. there's no bug, works you'd expect. if include "noauto" option you'll have use normal mount command mount manually.

can use "x-systemd.automount" or without "noauto" option.

if systemd mount @ appropriate time, , can use "mount -a" well.

code: select all

//192.168.1.3/back-up/grandix/grandos/webcam /mnt/webcam cifs credentials=/home/pi/secret.txt,x-systemd.automount 0 0
produce failed mount errors in boot screen , log since fstab still try mount @ boot though systemd mounting later, can ignore error messages. if want eliminate failed mount errors in log can add "noauto" option, fstab won't try mount it, again won't able use "mount -a".


raspberrypi



Comments

Post a Comment

Popular posts from this blog

invalid use of void expresion in FlexiTimer2 library

-
Image
hello, first post asking in forum patient if dont correctly   well, im trying make robot evades obstacles , uses interrupts in order distances. ive used flexitimer2 run void function each 5ms, problem whe try verify program says me there error in use of flexitimer.    code: [select] flexitimer2::set(1, 1.0/1000, rastreodistanciamin()); i copy code below, please can tell error , how solve it, ive been loking dont know do. thank you code: [select] #include <flexitimer2.h> #include <servo.h> //motor a int ena = 7; int in1=6; int in2 = 5; //motor b int in3=11; int in4=10; int enb=9; servo cabeza; //hc-sr04 device int echo = 13; int triger = 12; //it use hc-sr04 determine , return distance in front of him int calculodistancia(){   volatile int tiempo;   volatile int distancia;   digitalwrite(triger,low); /* por cuestión de estabilización del sensor*/   delaymicroseconds(5);   digitalwrite(triger, high); /* envío del pulso ultrasónico*/   delaymicroseconds(10);   tiem
Read more

error: a function-definition is not allowed here before '{' token

-
i'm new member. me pls code: [select] void manhinh1(){                              tempc = analogread(adc);   tempc = tempc * 0.48828125;                                          lcd.setcursor(0, 0); lcd.print("nhiet: ");                                      lcd.setcursor(7, 0); lcd.print(tempc);   lcd.setcursor(13,0); lcd.print((char)223);    lcd.setcursor(14,0); lcd.print("c");   if(max > min){     if (tempc > max)            {digitalwrite(fan, low);           lcd.setcursor(2, 1); lcd.print("lam mat.....");}     else if (tempc < min)           {digitalwrite(hot, low);           lcd.setcursor(2, 1); lcd.print("dang suoi...");           delay(10000); }     else if (tempc > min && tempc < max)           {digitalwrite(fan, high);            digitalwrite(hot, high);            lcd.setcursor(2, 1); lcd.print("on dinh!!");}              }    else if (max < min){    lcd.setcursor(0, 1);               
Read more

LED Strip Code

-
i downloaded code. here have several single leds flashing music microphone. in project, instead of single rgb leds, have 5 rgb led strips. need change in code? led strip 10m supernight rgb strip cut 5 equal strips. // arduino pin numbers const int do_pin = 2; const int ao_pin = 0; int sound; int led1 = 8; int led2 = 9; int led3 = 10; int led4 = 11; int led5 = 12;   void setup() {   pinmode(do_pin, input);   pinmode(led1, output);   pinmode(led2, output);   pinmode(led3, output);   pinmode(led4, output);   pinmode(led5, output);   serial.begin(9600); }   void loop() {     if (sound > 31) {     digitalwrite(led1, high);   }     if (sound < 31) {     digitalwrite(led1, low);   }     if (sound > 35) {     digitalwrite(led2, high);   }     if (sound < 35) {     digitalwrite(led2, low);   }     if (sound > 40) {     digitalwrite(led3, high);   }     if (sound < 40) {     digitalwrite(led3, low);   }     if (sound > 45) {     digitalwrite(led4, high);   }     if
Read more